
# Generated by default/object.tt
package Paws::DeviceFarm::Run;
  use Moose;
  has AppUpload => (is => 'ro', isa => 'Str', request_name => 'appUpload', traits => ['NameInRequest']);
  has Arn => (is => 'ro', isa => 'Str', request_name => 'arn', traits => ['NameInRequest']);
  has BillingMethod => (is => 'ro', isa => 'Str', request_name => 'billingMethod', traits => ['NameInRequest']);
  has CompletedJobs => (is => 'ro', isa => 'Int', request_name => 'completedJobs', traits => ['NameInRequest']);
  has Counters => (is => 'ro', isa => 'Paws::DeviceFarm::Counters', request_name => 'counters', traits => ['NameInRequest']);
  has Created => (is => 'ro', isa => 'Str', request_name => 'created', traits => ['NameInRequest']);
  has CustomerArtifactPaths => (is => 'ro', isa => 'Paws::DeviceFarm::CustomerArtifactPaths', request_name => 'customerArtifactPaths', traits => ['NameInRequest']);
  has DeviceMinutes => (is => 'ro', isa => 'Paws::DeviceFarm::DeviceMinutes', request_name => 'deviceMinutes', traits => ['NameInRequest']);
  has DevicePoolArn => (is => 'ro', isa => 'Str', request_name => 'devicePoolArn', traits => ['NameInRequest']);
  has DeviceSelectionResult => (is => 'ro', isa => 'Paws::DeviceFarm::DeviceSelectionResult', request_name => 'deviceSelectionResult', traits => ['NameInRequest']);
  has EventCount => (is => 'ro', isa => 'Int', request_name => 'eventCount', traits => ['NameInRequest']);
  has JobTimeoutMinutes => (is => 'ro', isa => 'Int', request_name => 'jobTimeoutMinutes', traits => ['NameInRequest']);
  has Locale => (is => 'ro', isa => 'Str', request_name => 'locale', traits => ['NameInRequest']);
  has Location => (is => 'ro', isa => 'Paws::DeviceFarm::Location', request_name => 'location', traits => ['NameInRequest']);
  has Message => (is => 'ro', isa => 'Str', request_name => 'message', traits => ['NameInRequest']);
  has Name => (is => 'ro', isa => 'Str', request_name => 'name', traits => ['NameInRequest']);
  has NetworkProfile => (is => 'ro', isa => 'Paws::DeviceFarm::NetworkProfile', request_name => 'networkProfile', traits => ['NameInRequest']);
  has ParsingResultUrl => (is => 'ro', isa => 'Str', request_name => 'parsingResultUrl', traits => ['NameInRequest']);
  has Platform => (is => 'ro', isa => 'Str', request_name => 'platform', traits => ['NameInRequest']);
  has Radios => (is => 'ro', isa => 'Paws::DeviceFarm::Radios', request_name => 'radios', traits => ['NameInRequest']);
  has Result => (is => 'ro', isa => 'Str', request_name => 'result', traits => ['NameInRequest']);
  has ResultCode => (is => 'ro', isa => 'Str', request_name => 'resultCode', traits => ['NameInRequest']);
  has Seed => (is => 'ro', isa => 'Int', request_name => 'seed', traits => ['NameInRequest']);
  has SkipAppResign => (is => 'ro', isa => 'Bool', request_name => 'skipAppResign', traits => ['NameInRequest']);
  has Started => (is => 'ro', isa => 'Str', request_name => 'started', traits => ['NameInRequest']);
  has Status => (is => 'ro', isa => 'Str', request_name => 'status', traits => ['NameInRequest']);
  has Stopped => (is => 'ro', isa => 'Str', request_name => 'stopped', traits => ['NameInRequest']);
  has TestSpecArn => (is => 'ro', isa => 'Str', request_name => 'testSpecArn', traits => ['NameInRequest']);
  has TotalJobs => (is => 'ro', isa => 'Int', request_name => 'totalJobs', traits => ['NameInRequest']);
  has Type => (is => 'ro', isa => 'Str', request_name => 'type', traits => ['NameInRequest']);
  has WebUrl => (is => 'ro', isa => 'Str', request_name => 'webUrl', traits => ['NameInRequest']);

1;

### main pod documentation begin ###

=head1 NAME

Paws::DeviceFarm::Run

=head1 USAGE

This class represents one of two things:

=head3 Arguments in a call to a service

Use the attributes of this class as arguments to methods. You shouldn't make instances of this class. 
Each attribute should be used as a named argument in the calls that expect this type of object.

As an example, if Att1 is expected to be a Paws::DeviceFarm::Run object:

  $service_obj->Method(Att1 => { AppUpload => $value, ..., WebUrl => $value  });

=head3 Results returned from an API call

Use accessors for each attribute. If Att1 is expected to be an Paws::DeviceFarm::Run object:

  $result = $service_obj->Method(...);
  $result->Att1->AppUpload

=head1 DESCRIPTION

Represents a test run on a set of devices with a given app package,
test parameters, and so on.

=head1 ATTRIBUTES


=head2 AppUpload => Str

An app to upload or that has been uploaded.


=head2 Arn => Str

The run's ARN.


=head2 BillingMethod => Str

Specifies the billing method for a test run: C<metered> or
C<unmetered>. If the parameter is not specified, the default value is
C<metered>.

If you have unmetered device slots, you must set this to C<unmetered>
to use them. Otherwise, the run is counted toward metered device
minutes.


=head2 CompletedJobs => Int

The total number of completed jobs.


=head2 Counters => L<Paws::DeviceFarm::Counters>

The run's result counters.


=head2 Created => Str

When the run was created.


=head2 CustomerArtifactPaths => L<Paws::DeviceFarm::CustomerArtifactPaths>

Output C<CustomerArtifactPaths> object for the test run.


=head2 DeviceMinutes => L<Paws::DeviceFarm::DeviceMinutes>

Represents the total (metered or unmetered) minutes used by the test
run.


=head2 DevicePoolArn => Str

The ARN of the device pool for the run.


=head2 DeviceSelectionResult => L<Paws::DeviceFarm::DeviceSelectionResult>

The results of a device filter used to select the devices for a test
run.


=head2 EventCount => Int

For fuzz tests, this is the number of events, between 1 and 10000, that
the UI fuzz test should perform.


=head2 JobTimeoutMinutes => Int

The number of minutes the job executes before it times out.


=head2 Locale => Str

Information about the locale that is used for the run.


=head2 Location => L<Paws::DeviceFarm::Location>

Information about the location that is used for the run.


=head2 Message => Str

A message about the run's result.


=head2 Name => Str

The run's name.


=head2 NetworkProfile => L<Paws::DeviceFarm::NetworkProfile>

The network profile being used for a test run.


=head2 ParsingResultUrl => Str

Read-only URL for an object in an S3 bucket where you can get the
parsing results of the test package. If the test package doesn't parse,
the reason why it doesn't parse appears in the file that this URL
points to.


=head2 Platform => Str

The run's platform.

Allowed values include:

=over

=item *

ANDROID

=item *

IOS

=back


=head2 Radios => L<Paws::DeviceFarm::Radios>

Information about the radio states for the run.


=head2 Result => Str

The run's result.

Allowed values include:

=over

=item *

PENDING

=item *

PASSED

=item *

WARNED

=item *

FAILED

=item *

SKIPPED

=item *

ERRORED

=item *

STOPPED

=back


=head2 ResultCode => Str

Supporting field for the result field. Set only if C<result> is
C<SKIPPED>. C<PARSING_FAILED> if the result is skipped because of test
package parsing failure.


=head2 Seed => Int

For fuzz tests, this is a seed to use for randomizing the UI fuzz test.
Using the same seed value between tests ensures identical event
sequences.


=head2 SkipAppResign => Bool

When set to C<true>, for private devices, Device Farm does not sign
your app again. For public devices, Device Farm always signs your apps
again.

For more information about how Device Farm re-signs your apps, see Do
you modify my app? (https://aws.amazon.com/device-farm/faq/) in the
I<AWS Device Farm FAQs>.


=head2 Started => Str

The run's start time.


=head2 Status => Str

The run's status.

Allowed values include:

=over

=item *

PENDING

=item *

PENDING_CONCURRENCY

=item *

PENDING_DEVICE

=item *

PROCESSING

=item *

SCHEDULING

=item *

PREPARING

=item *

RUNNING

=item *

COMPLETED

=item *

STOPPING

=back


=head2 Stopped => Str

The run's stop time.


=head2 TestSpecArn => Str

The ARN of the YAML-formatted test specification for the run.


=head2 TotalJobs => Int

The total number of jobs for the run.


=head2 Type => Str

The run's type.

Must be one of the following values:

=over

=item *

BUILTIN_FUZZ

=item *

BUILTIN_EXPLORER

For Android, an app explorer that traverses an Android app, interacting
with it and capturing screenshots at the same time.

=item *

APPIUM_JAVA_JUNIT

=item *

APPIUM_JAVA_TESTNG

=item *

APPIUM_PYTHON

=item *

APPIUM_NODE

=item *

APPIUM_RUBY

=item *

APPIUM_WEB_JAVA_JUNIT

=item *

APPIUM_WEB_JAVA_TESTNG

=item *

APPIUM_WEB_PYTHON

=item *

APPIUM_WEB_NODE

=item *

APPIUM_WEB_RUBY

=item *

CALABASH

=item *

INSTRUMENTATION

=item *

UIAUTOMATION

=item *

UIAUTOMATOR

=item *

XCTEST

=item *

XCTEST_UI

=back


=head2 WebUrl => Str

The Device Farm console URL for the recording of the run.


=head1 SEE ALSO

This class forms part of L<Paws>, describing an object used in L<Paws::DeviceFarm>

=head1 BUGS and CONTRIBUTIONS

The source code is located here: L<https://github.com/pplu/aws-sdk-perl>

Please report bugs to: L<https://github.com/pplu/aws-sdk-perl/issues>

=cut